Transcription: Let me show you why you should choose AGS to build your custom railing system. The first step is for you to provide to us your drawings or photograph in rough measurements. We will then take that information and create your entire railign system. Once you’ve approved the design, we will take that information […]
Transcription: Welcome to AGS. Within the past couple of years, we’ve added our new fiber laser tube cutting machine. This machine improves efficiency here in our factory and also gives use a higher quality product for our clients. Let me show you how it works. So, the first step in the process is the 2-D […]
Transcription: Welcome to AGS. Today, we’re going to showcase just how easy it is to install our Glacier glass rail system. The first step is to lay out all your components – wood blocks to line up the glass, glass clamps, and associated hardware. After the posts are in place, mount the glass clamped to […]
Transcription: Welcome to AGS. Today, we’re going to showcase just how easy it is to install our Olympus horizontal bar rail system. The first part is to insert the fixtures provided into the ends of the horizontal bars. Next, insert the bars into the fixed post. Once you’ve fitting all of the bars into the […]
Nestled in Sun Valley, Idaho, is a brand new modern subdivision of ten spec homes. Developed by Strider Group, Lane Meadows is mountain modern architecture: an entire micro-neighborhood where every custom home is unique and focused on an ethos of livability, quality, and efficiency. Located in the heart of Blaine County, Idaho, Sun Valley is […]
Transcription: A great way to get your cable railing system in a cost-effective way is to use wood posts and the cable as the infill. So today, what we’re going to show is how to cut the cable and attach the fittings and install your cable rail system in your wood railing. Okay. So, now […]
Transcription: How to protect wood posts by using cable sleeves. Cable sleeves prevent damage to your posts by providing reinforcement to drilled holes. Step one: lay out your posts. I’ve marked on some tape, so I won’t leave any marks on the actual post. Step two: drill halfway through both sides of the post. We’re […]
Transcription: Imagine a beautiful, quality stainless steel railing – the perfect finishing touch for your outdoor project, but you’re worried that you or your contractor will be overwhelmed with a thousand pieces to install and an overly complicated instruction manual. Well, guess what? Installing a fabulous railing is much easier than you think and amazingly […]
Transcription: Welcome to AGS. Today, we’re going to showcase how easy it is to install our Rainier cable rail system. The first step is to lay out all the system components – including the cable infill and the fittings. Next, you install your first post. After that post is installed, you install the first section […]
Transcription: Hello. My name Brandon with AGS Stainless. Today in this video, what we’ll be doing is showing you how to install lag terminals and adjustable lag terminals into four by four wood post. Okay. What we have here is the lag terminal assembly. The lag terminal is comprised of five different parts. First, we […]
Transcription: To activate the StarLight, first remove the battery panel using a small Phillips screwdriver. Remove the battery isolation tab. Replace the battery being sure it’s seated firmly in the compartment. Be careful not to overtighten the screws and strip out the holes. If desired, depress locking tap about one quarter inch. It should spring […]
Transcription: Alright. Base plate covers are a great way to dress up your posts, especially when you’re mounting into concrete. The concrete anchors aren’t quite as attractive as typical lag screws, so that’s a great way to dress up the post. It’s slightly more of a technical install than just using lag screws. So today, […]
